Completed Research
- 14-03: Developing a Training Video and Manual for Best Practices and Techniques in Clearing Different Interchange Configurations and Other Geometric Layouts (October 2018)
- 16-01: Utilization of AVL/GPS Technology: Case Studies (July 2018)
- 16-06: Training Video for the Implementation of Liquid-Only Plow Routes (June 2018)
- 16-04: Emergency Operations Methodology for Extreme Winter Storm Events (May 2018)
- 12-03: Understanding the Chemical and Mechanical Performance of Snow and Ice Control Agents on Porous or Permeable Pavements (January 2018)
- 15-02: Identification and Recommendations for Correction of Equipment Factors Causing Fatigue in Snowplow Operators (November 2017)
- 14-02: Quantifying the Impact That New Capital Projects Will Have on Roadway Snow and Ice Control Operations (November 2017)
- 14-05: Snow Removal Performance Metrics (May 2017)
- 12-04: Snowplow Operator and Supervisor Training (April 2017)
- 15-03: North American Study on Contracting Snow and Ice Response (February 2017)
- 14-04: Plug-and-Play Initiative: Phase II (February 2017)
- 14-07: Identifying Best Practices for Snowplow Route Optimization (January 2017)
- 14-01: Synthesis on GPS/AVL Equipment Used for Winter Maintenance (September 2016)
- 13-02: Understanding the Effectiveness of Non-Chloride Liquid Agricultural By-Products and Solid Complex Chloride/Mineral Products Used in Snow and Ice Control Operations (May 2016)
- 14-10: Roadway Salt Best Management Practices (November 2015)
- 14-06: Use Of Equipment Lighting During Snowplow Operations (September 2015)
- 13-03: Cost-Benefit of Various Winter Maintenance Strategies (September 2015)
- 13-01: Snow and Ice Control Environmental Best Management Practices Manual (July 2015)
- 13-04: Best Practices for the Prevention of Corrosion to DOT Equipment: A User’s Manual (May 2015)
- 14-08: Weather Severity Mapping Enhancement (March 2015)
- 12-02: Establishing Effective Salt and Anti-icing Application Rates (February 2015)
- 12-05: Comparison of Materials Distribution Systems (December 2014)
- 11-03: Development of a Totally Automated Spreading System (May 2014)
- 11-05: Environmental Factors Causing Fatigue in Snowplow Operators (March 2014)
- 10-03: Understanding the True Costs of Snow and Ice Control (January 2014)
- 11-02: Determining the Toxicity of Deicing Materials (December 2013)
- 11-01: Cost-Benefit Analysis Toolkit (Phase II) (June 2013)
- 11-04: Snow Removal at Extreme Temperatures (Phase I) (March 2013)
- 10-01: Developing a Training Video for Field Testing of Deicing Materials (December 2012)
- 10-02: Mapping Weather Severity Zones (September 2012)
- 08-02: Cost-Benefit Analysis Toolkit (November 2010)
- 09-02: Identifying the Parameters for Effective Implementation of Liquid-Only Plow Routes (September 2010)
- 07-01: Development of Standardized Test Procedures for Carbide Insert Snowplow Blade Wear (September 2010)
- 09-01: Correlating Lab Testing and Field Performance for Deicing and Anti-icing Chemicals (Phase I) (August 2010)
- 08-02: Development of Interface Specifications for Mobile Data Platforms on DOT Vehicles (April 2010)
- 07-01: Development of Standardized Test Procedures for Evaluating Deicing Chemicals (April 2010)
- 08-02: Developing and Evaluating Safe Winter Driving Messages (March 2010)
- 06-01: Determining Effectiveness of Deicing Materials and Procedures (December 2009)
- 05-02: Calibration Accuracy of Manual and Ground-Speed-Control Spreaders (February 2008)
- 05-01: Synthesis of Best Practices for Eliminating Fogging and Icing on Winter Maintenance Vehicles (September 2006)